stuffing box

stuffing box

美 　英

• na.【机】填充[填料]函
• 网络填料函；填料箱；填料盒

英汉解释

na.	1. 【机】填充[填料]函

英英解释

n.	1. an enclosure containing compressed packing that is used to prevent leakage around a moving part such as a piston rod

例句

The smooth length of brass or steel rod that moves up and down through the stuffing box or packing gland of a sucker rod pump.

用于有杆泵的经盘根盒或盘根压盖上下移动的一根光滑的黄铜杆或钢杆。

The lubricator is just high enough to handle the longest string of tools between the wireline valve and the stuffing box.

防喷管的高度恰好足以在钢丝绳阀与盘根盒之间装卸最长的工具串。

Large stuffing box accommodates all packing arrangements, including live-loaded design and lantern ring type for severe services.

大型填料函可适应所有填料配置排列，包括适用于严酷应用环境的动负载结构和套环。

Packing: Packing contains corrosion inhibitor to avoid stem pitting. Stuffing box is deep, assuring long packing life.

填料：填料内含防腐剂，避免锈蚀阀杆。深度填料函确保较长的填料使用寿命。

The backside of impeller: due to special design of backside impeller, the pressure on the stuffing box is minimum.

叶轮背部：由于叶轮背面的特殊设计，将填料箱上的残余压力减到最小。

The polished rod also forms part of the sealing system between the tubing and the atmospere in the stuffing box.

光杆还成为在油管与盘根盒空间之间的密封系统的组成部分。

The stuffing box is machined relative to the seat minimizing seat and external leakage simultaneously.

填料函是相对于阀座的机械装置，能够最大限度减少阀座和外部同时出现泄漏。

Increasing the distance from oil hole to inner annulus of the stuffing box can prevent the fatigue.

适当增加输油孔到填料盘内环的距离可以预防裂纹的产生。

Gland Eye Bolts: Eye bolts are securely fastened to the bonnet yet swing away to permit easy access to the stuffing box.

压盖有眼螺栓：有眼螺栓能够安全地紧固阀盖，也可以旋转拆卸，便于方便容易地进入填料函。

Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.

离心泵的基本构造是由六部分组成的，分别是：叶轮，泵体，泵轴，轴承，密封环，填料函。

Gland Eye Bolts: Eyebolts swing aside for ease in repacking the stuffing box.

压盖有眼螺栓：有眼螺栓可以从旁边旋起，使得填料函的填料更换更加容易。

Development and Application of An Omnidirectional Deflection Adjustment Stuffing Box

全位调偏盘根盒的研制与应用

Structure and leakage analysis to the stuffing box of new hydrogen compressor

异构脱蜡装置新氢压缩机填料函结构及泄漏故障分析

Development and application of centralizing polished rod stuffing box

随动对中光杆密封器的研制与应用

The new material and developed technology of stuffing box sealing

填料密封新材料和新技术

Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet

密封.填料盒直径及相关填料宽度.结构尺寸表

Stuffing box for agitator shafts of carbon and stainless steel

非合金钢和不锈钢制搅拌轴的密封填料盒

Main engine stuffing box lubricating oil dirty tank

主机填料函污滑油柜

No stuffing box maintenance required

不需要维护填料函

Blowout preventer of stuffing box type

泥包式防喷器

Sleeve and bonnet stem bushing in stuffing box

填料函里的套管和阀盖阀杆衬套

Scribe sleeve at face of stuffing box

在轴套上标注密封腔端面位置

Water-cooled jacket for stuffing box

填料箱水冷水夹套

Lantern ring and pipe plug in stuffing box

填料函里的套环和管塞

Piston rod stuffing box cup

活塞联杆填料函盖